MIT-World Peace University (MIT-WPU) is a top educational institute located in Pune, India. It is recognized within&nbsp;UGC under Government of Maharashtra Act No. XXXV 2017.&nbsp;

It is part of the MIT group of institutions (established in 1983) which covers 10+ campuses across India and has more than 50,000+ students enrolled across various disciplines at a given point of time. The institute houses 15 schools ranging from Engineering &amp; Technology, Design, Pharmacy, Commerce, Governance among others. It offers undergraduate, postgraduate and PhD programs among different disciplines.&nbsp;

&nbsp;

MIT World Peace University

In an agricultural country like India farmer's contribution is very vital. Though a lot of work is going on to increase the yield quality, security of the crops is also the question on the front because if the crops are destroyed or damaged due to animals or thefts the farmers are helpless. Hence we propose a system to help a farmer to identify where an animal or thief has entered the field using Fuzzy Classification. In machine learning many classifiers are there like Neural network, Convolutional neural network, Probabilistic approach, K-nearest neighbor, SVM, etc. But little literature is found on Fuzzy classifiers. Hence we introduce here an approach to classify the images of farm at fencing with and without animals using Fuzzy systems. © Grenze Scientific Society, 2022.

School of Electronics & Communication Engineering

Engineering and Technology

World University root node

13th International Conference on Advances in Computing, Control, and Telecommunication Technologies, ACT 2022

Farm Security with Fuzzy Classification - An Approach

3D Printing is a technology which is based on additive manufacturing. This technology has a potential to change the manufacturing industry by manufacturing product in the shortest time period where at first the same product required days, months or years. The study on these printers and their software is to reduce the cost of printers as compared to one already present in the market. This paper is based on the types of 3D printing methods used from the early 1980s till today and their hardware and software used. © 2018 IEEE.

Proceedings of the 2nd International Conference on Intelligent Computing and Control Systems, ICICCS 2018

Recent Developments in 3D Printing Technologies: Review

Raga, one of the major pillars of Indian Classical music is arrangement of swaras in specific order and time. In western music a lot of research has been done on notes detection and scale identification. But being swar based, very less work is done in Indian classical music. We propose a raga identification system with different methods like Fourier transform, chromogram and spectrogram with database of few santoor samples and few songs in light music. Many variations in expressions and timings at the time of performance limit the accuracy of the system and we get reasonable accuracy for the raga identification. © 2019 IEEE.

2019 IEEE Pune Section International Conference, PuneCon 2019

Towards Raga Identification of Hindustani Classical Music

In this paper we propose an approach of deciding a quality parameter for evaluation of relative quality of the sound produced by the synthesizer with reference to the sound of the original Indian classical instrument. Tonal quality of a musical note is a subjective aspect. The work presented in the paper aims at providing quantification that will assess the quality of the musical note of the instrument produced on synthesizer and the equivalent note produced on the real instrument. In this paper we nomenclate this quality parameter as HPHPQM (Hybrid Pre-ranked Heuristically Preferential Quality Metric). The paper also presents the Interrater statistics carried out to confirm the effectiveness of the proposed parameter. Sitar and flute are the instruments considered for the experimentation. In a nutshell to the best of authors' knowledge no work has been reported towards incorporating the quality parameter to judge the qualitative closeness of instrument sound on synthesizer and real instrument sound. This paper proposes solution for the same.

Sensor Letters

Hybrid Pre-Ranked Heuristically Preferential Quality Metric for Actualization of Musical Sensors and Tonal Perception

Scissor lifts are used as an alternative to scaffolding and ladders to work in elevated areas, they are very commonly used in warehouses and working sites. But, the random distribution of load on and uneven surfaces on working sites, have accounted for a lot fatal accidents due to lift tip-over. The current understanding of scissor lift considers static load and working conditions. This paper proposes an embedded system, which can be added to the scissor lifts current control mechanism using an inertial measurement unit (IMU) to measure the tilt angles of the platform, and relays for signal conditioning. Complementary filter has been applied to decrease the drift error in angle measurement by the IMU. The electro-mechanical relays have high Mean Time between Failure hence increasing overall reliability of the system. The performance of the system along with the dynamic control mechanism have been mentioned in the paper. © 2018 IEEE.

Proceedings - 2018 4th International Conference on Computing, Communication Control and Automation, ICCUBEA 2018

Embedded Control System for Self Adjusting Scissor Lift

This system is mainly based on two techniques, CNC machine and 3D printing. 2D plotter is used for drawing circuits on any surface like paper, cardboard as per the user requirement and conductive ink or marker is used as an object for drawing circuits. Conductive marker is placed in such a way that it can be moved in x and y direction using stepper motor and in up and down direction using servo motor. Arduino Uno or mega and CNC shield is used to drive motors. Benbox software is used to generate G-code and give input image of drawn circuit to the plotter. The research work is focused on a low cost and simple controlling system for 2D plotter machines to draw electronic circuit diagrams of PCBs on any surface. © 2018 IEEE.

Implementation of Paper PCB Using Conductive Ink 2D Plotter

International Journal for Science and Advance Research In Technology-IJSART

3D Scanner for Real Time Objects

Pitch detection algorithm is important feature in the speech processing algorithms. It can be used for speaker recognition, speech instruction of the hearing impaired ones, vocoder systems, discriminate normal and pathological voice etc. Hence robust and accurate determination of pitch is necessary. The paper involves determining pitch of the speech signal by the pitch detection algorithm - 1) Autocorrelation method, 2) Cepstrum Method, 3) Simplified Inverse Filtering Method 4) Data Reduction Method. A measurement is made on the pitch contours to explore how voice/acoustic parameter like fundamental frequency can determine person's health. The paper attempts to identify and classify the pathological voices from the normal voices using k-NN algorithm. The relative performance comparison is done in terms of accuracy and speed of operation of the above mentioned algorithms.